Capacity
Beltpacks per Base Station: 16 BPs (FSII or FSE)
Transceivers/Antennas 支持ed by Base: 6 x IPT or FSE TCVR and 10 x E1 TCVRs (1.9 or 2.4 ghz)
Headset Microphone Input
Input Type: Dynamic /Electret - Selectable
Frequency Response: Headset Mic - Partyline: 200Hz – 12kHz + 3dBu
Frequency Response: Headset Mic - Line Out: 200Hz – 20kHz + 3dBu
Mic Limiter Threshold: -50dBu ±3dB
Mic Limiter Range: = 20dB
Max Input Level: -25年dbu
Input Level: -60年dbu nominal; -25年dbu MAX
Headset Mic Voltage: 5V (Electret selectable)
Headset Output
Load Impedance: > 32Ω
Output Impedance: 33Ω
Max Output Level before Distortion: > 13dBu
Total Harmonic Distortion (THD): < 0.1% THD at 1千赫
Headset Mic - Partyline: -78dBu (十大正规体育平台 mode)
Headset Mic - Line Out: -60年dbu
Frequency Response: Partyline - Headset Out: 200Hz – 10kHz + 3dBu
Audio/Radio
4-wire I/O: Output Impedance >10kΩ, Input Impedance 200Ω + 10%, transformer isolated balanced input and output.
4-wire Operating Levels: 0dBu Nominal, 18dBu headroom
2-wire I/O: Selectable RTS or 十大正规体育平台 mode, Software controlled auto-null, null depth >60dB at 1千赫
2-wire Operating Levels: -18dBu nominal (十大正规体育平台 Mode), -12dBu nominal (RTS Mode), Headroom 18dB
Frequency Response Base-to-Beltpack:
Freespeak Edge Beltpack: 200Hz – 12kHz
Freespeak II Beltpack: 200Hz – 7.1千赫
Partyline I/O
2W Power On/Off: A/B, C/D paired- software controlled
2W Output Voltage: 25 – 28V DC, 560 mA per pair (A/B or C/D)
2W Impedance: >10kΩ
2W Frequency Response: 200 to 12kHz. ±3dB
2W Total Harmonic Distortion (THD): < 0.1% THD at 1 kHz
Relay Contacts or GPIO
Connector Type: 2 × DB9
Relay Contact Type: 领域
Relay Quantity: 4
Relay Contact Voltage Rating: 30 v直流
Relay Contact Current Rating: 1A
Input Type: Opto-Isolated
Input Quantity: 2
Input Voltage Range: 4 - 30 volts DC or AC
Input Current: >=1.2mA required
Connectors
4-wire I/O: (8) RJ45
2-wire I/O: (4) XLR-3F
Program 输入: XLR-3M, provided using cable assembly CAB-RJ45-PGM-SA
Stage Announce 输出: XLR-3F, provided using cable assembly CAB-RJ45-PGM-SA
Headset: Freespeak Edge Base: 4-pin XLR-M, auto headset detect
USB接口: USB type A Receptacle
Number of E1 antenna ports: 2 x RJ45, 2 x Fiber (2 active at any time)
DECT Radio frequency sync: Rear RJ45 input and output RF sync connectors
Indicators and Function
Displays: (2) 480 x 128 color TFT LED Touch Screen displays
Front Panel Indicators & Function: (2) Power Supply Status LEDs (1) Status LED (Edge) (1) Three Color Level Control LED Array
力量: AC Mains input: 100-240V AC, 50-60Hz, 160W Max, IEC60320 C14 inlet.
DC Low Voltage 输入: 12V DC +/- 5%, 12A
External AC/DC Power Supply (453G020-1 Supplied):
输入: 100-240V AC, 50-60Hz, 2.2A Max, IEC60320 C14 inlet.
输出: 12V DC +/- 5%, 12.5A
Environmental
Operating: 32° to 113°F (0° to 45°C)
Storage: 86° to 158°F (30° to 70°C)
Humidity: 20-90% Non-Condensing
Dimensions
1RU 19 x 1.72 x 13.929in (WxHxL)
(43.6 x 482.6 x 353.8mm)
深度: 260mm
Weight: 7.25lbs (3.29kg)
Network Specifications
AoIP Interfaces
Protocols: RTSP/SAP AES67 Dante
Audio Sampling: 24 bit Linear 48KHz
IP Addressing: Static, DHCP
Network Compatibility: Layer 2 & 3 LAN only
Quality of 服务: DiffServ RFC2474
IGMP: On (AoIP)
Multicast: On (AoIP)
Network Timing: PTPv2 (AoIP) / PTP v1 (Dante) Minimum Network Bandwidth Required
Perduplex Connection: 1 x FS II IPT bandwidth usage: ~ 7 Mbps.
1 x FS Edge IPT: ~ 9.6 Mbps Network Protocols Ethernet IPv4 Unicast Audio and Control mDNS–Multicast Device Discovery
Network Ports
Unicast:
Port 80 TCP–Web Interface, System Management, Expansion
Port 443 for HTTPS
Port 6001 UDP–AES67 Data
Port 15000 – 15256 UDP – AES67 Audio
Multicast:
Port 5353 UDP–mDNS, Names, Discovery, Linking, Expansion, Dante (through various ports)
Network Jitter Tolerance: < 1us required for RF Syncing of Transceivers
Recommended Ethernet Switches
Managed Ethernet Switch – Layer 3 100/1000 Base-T ports for endpoints
1000 Base IP Trunks between switches
QoS Configuration Energy Efficient Ethernet bypass option
IGMP Snooping bypass option